Concrete Wall Forms with a 6-12 Hole Pattern

Concrete Forms with a 6-12 Hole pattern | 3000 Pours 

The 6/12 hole pattern provides for 12" jumps.  Since its inception, it is grown in popularity for a variety of reasons including:

Wider hat sections can only be done with the 6-12 pattern. 

The tie pattern on a 6-12 concrete form makes it easier to install ledges, windows, & rebar from the top of the wall without a tie interfering.  

It is easier to train guys to think in an even 1’ increment rather than 8".  

There are often concrete form sets available in the 6-12 hole pattern, making adding to your fleet easier and less expensive.  

Call Our office at 816-777-3956 or Email Us to learn about Western Concrete Forms.  

6-12 Concrete Wall Form

6-12 Concrete Forms come in Heights 1' all the way to 10',  1" through 36" (3 feet wide is our Full Panel) in Width.  Available in a .094 and .120 facesheet, the 6-12 Concrete Form is versatile, lightweight and lasts 3000 pours or more with proper care.    

Our top of the line Elite Concrete Form 36"X 108" weights only 85 pounds.   

When you buy a Western Concrete Form, you'll realize the difference in Value!  


Assists in moving your ties up and down to clear rebar, electrical, and plumbing considerations.

3 Hole Bushing 800x540 0001.jpg


Gasket increases concrete form life and reduces cleaning costs daily. Gasket eliminates concrete leaks through unused tie slots and pinholes in your concrete wall forms. Without the gasket, concrete leaks on to the hat sections on the backside of the panel and builds up on the siderails.      A Western Forms Exclusive ! 

Gasket Siderail 0001 800 x 540 001.jpg


Standard baseplates accommodate PinLock™ attached hardware system components.   


PinLock™ is faster and easier to use than other attached hardware systems. This innovative self-cleaning, self-lubricating seal system makes operation smooth. PinLock™ eliminates 90% of standard pin & wedges needed. You will experience a considerable increase in productivity, saving up to 25% setting and up to 20% stripping time, while reducing lost hardware. This system also reduces new employee training time by 95%. The Western Forms bushing has a Lifetime Guarantee when used in conjunction with PinLock™.

PinLock Final 11-29-17 900x450 0001.jpg


Just one more of the many Western Forms firsts, for added durability in a form that typically lasts over 3,000 reuses

PREMIUM HAT on Concrete Forms 

Western Forms Hat provides superior bracing with the widest hat in the industry. The span between the hats are 5 1/2”  and competitors’ panels are 6” to 10”.  Concrete forms provide continuous contact with the face sheet for extra rigidity combating deflection and pillowing, providing flatter concrete walls.


Only Western  Aluminum Concrete Forms offers pickup handles for a simple lift of these extremely efficient concrete forms.


All Elite, Gasket, & Flagship concrete forms feature a full backbone to provide additional stability that also reduces pillowing and reverse bow throughout the life of the form, resulting in flatter walls every pour.


Reduces maintenance and concrete buildup. Contractors eliminate the extra time needed to break-in new forms with this exclusive pre-seasoning process. 


16 Line Welds are more resistant to failure with up to twice the welds of competitors’ forms. All 900 mm horizontal hats are welded in 16 places - giving you more welds where the bulk of the stress occurs.


Eliminate unnecessary concrete buildup and simplify cleaning with flat siderails, on Western Concrete Forms systems. 

Learn More
Contact Us

We're here to help

Project Overview