Welcome! | Login  
Videos Home










Find a Representative

Flash required

Get Adobe Flash player

The Classic Form 125 smooth is Durand’s traditional panel. The top choice for poured wall contractors for over three decades. The “old reliable” form includes outstanding features, making it more desirable than ever. The Classic Form 125 now incorporates side, top and bottom rail extrusions, which are strong, yet light weight and allow inset of the face sheets to protect the edges. Spring Tension Bushings are optional, making wedge removal easier on this form.

The Classic Form 94 smooth also incorporates side, top and bottom rail extrusions, which are strong, yet light weight and allow inset of the face sheets to protect the edges. The extruded shape of the horizontal stiffeners minimized the span between the touch points on the face sheets to reduce pillowing. Spring Tension Bushings are optional, making wedge removal easier.
 

    125 Features and Benefits:

  • Inset face sheet around perimeter of panel
  • Full perimeter weld around face sheets
  • Pin hole patterns: 6”- 12” or 8"- 8"
  • Horizontal bracing option: top hat horizontal brace (reduces pillowing) or aluminum tubing
  • Attached pin-ready (18” or wider)
  • Attached pin option on all panels 18” or wider
  • Pressed in hardened bushings or riveted Spring Tension Bushings with 1 hole or 3 holes*.
  • Strong back (option/premium)
  • Width: 1" to 36"
  • Height: 1' to 10'

* Available only in 6" - 12" hole patterns for holes 4" - 6" - 8" top and
bottom on 9' forms and holes 6' - 8" - 10" top and bottom for 8' forms.

    94 Features and Benefits:

  • Inset face sheet around perimeter of panel
  • Full perimeter weld around outside rails
  • Pin hole patterns: 6”- 12” or 8"- 8"
  • Horizontal bracing: top hat horizontal brace standard (reduces pillowing) or aluminum tubing
  • Attached pin-ready (18” or wider)
  • Attached pin option on all panels 18” or wider
  • Pressed in hardened bushings or riveted Spring Tension Bushings with 1 hole or 3 holes*.
  • Strike plate standard (prevents hammer damage)
  • Strong back (option/premium)
  • Width: 32" and 36" only
  • Height: 1' to 10'

* Available only in 6" - 12" hole patterns for holes 4" - 6" - 8" top and
bottom on 9' forms and holes 6' - 8" - 10" top and bottom for 8' forms.